Skip to the beginning of the images gallery

Aluminum Hollow Plunger Hydraulic Cylinder

Be the first to review this product

SKU

RACH

Brand: Enerpac

In stock

Only %1 left

Capacity : 20 - 150 ton

Stroke : 50 - 250 mm

Center Hole Diameter : 27- 79 mm

Maximum Operating Pressure : 700 bar

Details

RACH-Series Hollow Plunger Hydraulic Cylinders (sometimes called center-hole cylinders) feature a hollow plunger with an internal thread to allow fixing to the component to be pulled. This makes them the ideal choice for when you need a lighter, more portable cylinder for applications such as tensioning, testing, pulling, and lifting. Each RACH Cylinder is rated for up to 10,000 psi (700 bar) and compliant with ASME B30.1.

Each RACH Cylinder is single-acting and uses a high-strength return spring for rapid retraction. All are equipped with bolt-on hardened steel saddles and a steel base plate for increased durability.

Aluminum is not only lightweight, but also inherently less corrosive than steel, which makes it a great material for use in many caustic environments. For enhanced protection, RACH Aluminum Cylinders are finished with an anodized hard coat finish to resist damage and extend cylinder life.

Feature

Hollow plunger design allows for both pull and push forces
Composite bearings increase cylinder life and side load resistance
Hard coat finish on all surfaces resists damage and extends cylinder life
Handles included on all models
Floating center tube increases seal life
Steel baseplate and saddle for protection against load-induced damage
Integral stop ring prevents plunger over-travel and is capable of withstanding the full cylinder capacity
High-strength return spring for rapid cylinder retraction
CR400 coupler and dustcap included on all models
All cylinders meet ASME B-30.1 standards

Specifications

Cylinder Capacity @ 700 bar ton (kN)	Stroke (mm)	Model Number	Cylinder Effective Area (cm2)	Oil Capacity (cm3)	Collapsed Height (mm)	Extended Height (mm)	Outside Diameter (mm)	Cylinder Bore Diameter E (mm)	Plunger Diameter (mm)	Bottom to Advance Port (mm)	Saddle Diameter (mm)	Saddle Protrusion from Plunger (mm)	Center Hole Diameter (mm)	(kg)
Cylinder Capacity @ 700 bar ton (kN)	Stroke (mm)	Model Number	Cylinder Effective Area (cm2)	Oil Capacity (cm3)	A	B	D	E	F	H	J	K	Y	(kg)
20 (229)	50	RACH202	32.7	164	188	238	100	75	55	29	55	10	27	5.2
	100	RACH204	32.7	327	251	351	100	75	55	29	55	10	27	6.1
	150	RACH206	32.7	491	315	465	100	75	55	29	55	10	27	7.1
	200	RACH208	32.7	654	378	578	100	75	55	29	55	10	27	8
	250	RACH2010	32.7	818	442	692	100	75	55	29	55	10	27	9
30 (358)	50	RACH302	51.1	256	208	258	130	95	70	29	70	10	34	8
	100	RACH304	51.1	511	267	367	130	95	70	29	70	10	34	9.5
	150	RACH306	51.1	766	333	483	130	95	70	29	70	10	34	11.2
	200	RACH308	51.1	1022	395	595	130	95	70	29	70	10	34	12.9
	250	RACH3010	51.1	1277	458	708	130	95	70	29	70	10	34	14.5
60 (596)	50	RACH602	84.7	423	251	301	180	130	100	61	100	12	54	16.2
	100	RACH604	84.7	847	315	415	180	130	100	61	100	12	54	19.5
	150	RACH606	84.7	1270	380	530	180	130	100	61	100	12	54	25.6
	200	RACH608	84.7	1694	445	645	180	130	100	61	100	12	54	26
	250	RACH6010	84.7	2117	510	760	180	130	100	61	100	12	54	29.6
100 (1157)	50	RACH1002	164.6	823	258	308	250	185	145	61	145	14	79	33.8
	100	RACH1004	164.6	1646	325	425	250	185	145	61	145	14	79	39.8
	150	RACH1006	164.6	2487	391	541	250	185	145	61	145	14	79	46.2
	200	RACH1008	164.6	3291	459	659	250	185	145	61	145	14	79	52.2
	250	RACH10010	164.6	4114	527	777	250	185	145	61	145	14	79	58.8
150 (1588)	50	RACH1502	225.8	1129	280	330	275	205	150	61	145	14	79	48.9
	100	RACH1504	225.8	2258	360	460	275	205	150	61	145	14	79	55.7
	150	RACH1506	225.8	3387	430	580	275	205	150	61	145	14	79	63
	200	RACH1508	225.8	4517	500	700	275	205	150	61	145	14	79	70.1
	250	RACH15010	225.8	5646	570	820	275	205	150	61	145	14	79	77.2

Aluminum Hollow Plunger Hydraulic Cylinder

Contact Us

ABOUT US

ORDER SUPPORT

My Account

Be In Touch With Us: