FDD Wireless Data Transfer Torque Wrench

Features

• Defect prevention with a large pass/fail decision LED: Transmission error or tightening torque defect can be immediately known from this large LED.
• Battery life is five times that of the conventional product.*: Continuous use time is significantly increased to 24 hours from 5 hours in the case of conventional FHD. It can be used for about one day without changing the batteries, which not only reduces the battery cost, but also eliminates the effort required for replacing the batteries.（*In the case of FD model. Continuous use time in the case of FDD model is 12 hours.)
• The receiver has been upgraded to the R-CM Wireless Receiver with Interchangeable Modules.
• LCD display of the transmitter would show the tightening torque.
• Compact transmitter with enhanced workability: Transmitter has been made compact compared to the conventional product. Starting from 25N･m class torque wrench (example: CSP25N3) it can be loaded, and it can be used in a small place or for tightening at a small torque.
• Settings can be done easily using a computer. The setting software can be downloaded for free from the Tohnichi website. Use the RS232C cable to connect the setting controller (SB-FH2) to the computer, then send the settings wirelessly from SB-FH2 to the FD/FDD transmitter and the R-CM + M-FD receiver.
• [Features of FDD] "Two rounds of tightening detection function": By mounting a gyro sensor and monitoring the angle, it is possible to prevent the tightening of bolts two times. Pokayoke for just managing the number of times of tightening or simple tightening torque data management offer highly reliable torque management. (*Remodeling from FD model is also possible.)
• Marking torque wrench "MQSPFD/MQSPFDD" equipped with the FD/FDD transmitter, with which you can ensure in a later process or even after shipment that tightening was correctly performed; can be custom-made after receiving an order.
• Tohnichi’s interchangeable head torque wrenches can be used with our interchange head lineup, which offers the best selection in the world, making these wrenches ideal for your work.
• The FD/FDD series are compliant with ISO 6789:2017 starting January 2022. For more information, see the technical data “Initiatives for ISO 6789:2017” at the bottom of the screen.
• Accuracy ±3%